2.4G Wireless DMX512 Signal Controller Male Female XLR 3pins DMX
Wireless Transmit Receiver
1. Tricolor LED displaying
2. 126 channels jumping frenquecy automaticly,high anti-jamming
ability. to ensure works reliability
3. 7 groups ID code settable,User can use 7 groups individual
wireless net without any interfere each other in the same place...
4. Input voltage:5VDC 500mA MIN
5. Communication distance:400M(visible distance , it has some
different base on environment)
6. Work frequency section:2.4G ISM,126 channels.frequency section
7. Max transmitting power rate:20dBm
8. Receiver sensitive:-94dBm
9. Signal port:3pin female plug
ID code and LED color corresponding correlation:
3: RED+GREED = YELLOW
5: RED+BLUE = PURPLE
6: GREEN+BLUE = CYAN
7: RED+GREED+BLUE = WHITE
Press key 1 time to indicate ID setting, press again to set ID,
then ID value adding 1 each time by press.
LED constant lit up: no DMX or wireless signal
Red LED flash: transmitting
Green LED flash: Receiving
RF frequency------2. 400-2. 525G, total 126 channels, it is
ID Code------1-7 groups ID code, press "Key" for setting, it only
can works under same ID code of transmitter and receiver.
1. Power on DMX512 wireless received board and transmitted board.
2. Press "Key" button to set same ID value of transmitted board and
received board, please use different ID value if you need to use
more than 1 group wireless system at the same time in the same
3. The red LED flashes when transmitter transmits DMX data by no
interfered frequency section, then receiver changes communicated
frequency section. Green LED flash till received corrected same ID
value, LED flash more fast once DMX data more fast.
4. Communication was established correctly then.
Wireless DMX Transmitter ( Male Plug) ...............1pcs
Wireless DMX Receiver (Female Plug) ...............1pcs
Power Supply ...............1pcs